- ページ 10

エクステンダー DataBay AVE-308TのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。DataBay AVE-308T 15 ページ。 Vga and audio cat-x av extender
DataBay AVE-308T にも：ユーザーマニュアル (11 ページ), ユーザーマニュアル (16 ページ)

ページを印刷する

(3) Function Test: Turn on your AV device, the POWER LED should turn on

green to indicate the Power On status and the LEDs above RJ-45 will blink

before VGA signal is turned On and remain On after VGA signal is turned On.

5.2 Receiver AVE-301R installation and UTP Connection:

(1) Site Selection: Please place Receiver in an appropriate place and have the

UTP cable settled for later connection; you can use magnetic pad to attach

the unit on metal plane or use attachable rack mounting kit to fix the unit

on selected area by screw or nail.

(2) Power Up: Plug power adapter to the Receiver and connect monitor and

speaker to the "VGA OUT" and "AUDIO" port. The POWER LED will turn on

green to indicate the POWER ON status and the LED above RJ-45 port

should blink to indicate the AV signal unconnected status.

(3) Selection of UTP Cable: For best VGA resolution, please use Cat5

Enhanced cable (350MHz bandwidth) for connection, please noted that the

maximum extended length of one section (one pair of Transmitter or

Receiver) should not exceed 300 meters. The connector must be made by

568B/568B type.

PAIR 3

PAIR 2

PAIR1

4 5

Jack Position

(4) Connect UTP Cable:

Installation Diagram of Receiver AVE-301R

The EIA/TIA definition of 568B in the

PAIR4

pin assignment is (1)orange white,

(2)orange, (3)green white, (4)blue,

(5)blue white, (6)green, (7)brown

white, and (8)brown.

10 / 15

VGA and Audio CAT-5 AV Extender