- ページ 17

エクステンダー DataBay DVS-104CのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。DataBay DVS-104C 20 ページ。 Cat5 dvi-d + audio extender family

Stack More Transmitters to Have More Displays

1. If you would like to broadcast more monitors and speakers, you

can connect another layer of same series Cat5/5e/6 DVI-D + Audio

Transmitter. You can connect additional Transmitter from "VIDEO/

AUDIO IN" port or "RJ-45 VIDEO and RJ-11 AUDIO" ports:

(1) From "VIDEO/AUDIO OUT": Use one set of standard DVI/Audio cable,

one end connect from the "VIDEO/AUDIO OUT" port of the first layer'

s Transmitter and the other end to "DVI/AUDIO IN" port of the second

layer's Transmitter. (Refer to following connection

(2) From "RJ-45 VIDEO and RJ-11 AUDIO": Similar to the way of

connecting monitor and speaker, you connect DVS-DR and DVS-

AR to the "VIDEO/AUDIO IN" port of the second layer's Transmitter.

The length for this extension should between 10 to 5 meters and

the total extended length and resolution is about 800x600@0m,

104x768@15m, 180x104@10m. Previous range can be applied

in most of the application, but in some cases it might change. It will be

appropriate to test the capacity of display before installation. (Refer to

following connection

Short Range

Receiver

x 8

❶

10-0 m

Diagram of Connecting another Layer of Cat5/5e/6 DVI Transmitter

. To ensure the transmitting quality of DVI-D signal, more than two layer of

stacking is not recommended.

. The transmitter can be , 4, or 8 port model.

❷

)

Long Range

Projector

Receiver

x 4

❷

5 m

❶

)

PDP

DVI Projector Monitor

Cat5/5e/6 + Phone cable

Standard DVI, Audio cable

DVI

Audio

DVI+Audio cable

LCD