- ページ 7

エクステンダー DataBay ET-HD0101RCのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。DataBay ET-HD0101RC 11 ページ。 Hdmi over cat-5 extender kit with ir control path

Front Panel of ET-HD0101-RC

HDMI OUT:

Connect to a HDMI display with a HDMI male-male cable here.

Signal Level:

Adjust the 8-level equalization control to the received HDMI signals. 0 – 7 = strongest –

weakest for respective transmission length [long to short]. It is recommended to switch

from 7 to 0 to find the optimal visual experience.

IR Receiver:

Infrared 3.5mm socket for plugging in the extension cable of IR receiver.

Rear Panel of ET-HD0101-RC

A/V SIGNAL:

Plug in a Cat-5/5e/6 cable that needs to be linked to the A/V SIGNAL port of the

transmitting unit ET-HD0101-TC.

CTRL CHANNEL:

Plug in a Cat-5/5e/6 cable that needs to be linked to the CTRL CHANNEL port of the

transmitting unit ET-HD0101-TC.

+5V DC:

Connect to 5V DC power supply.

7 / 11