- ページ 4
プリンター DataCard CR500のPDF クイック・インストール・マニュアルをオンラインで閲覧またはダウンロードできます。DataCard CR500 15 ページ。 Instant issuance system
DataCard CR500 にも： クイック・インストール・マニュアル (18 ページ)
ページを印刷する
CR500 Instant Issuance System Quick Install Guide
b. Secure the printer to the work
surface (if required). For detailed
specifications and instructions,
refer to the printer's Installation
and Administrator's Guide.
c. Attach the concealed output
stacker to the printer.
2
Printer Base
Spacer
Work Surface
Washer
Bolt
3. Connect the Power Source
a. Connect the power cord to the
print unit (A).
b. Connect the print unit power cord
to the power source (B).
c. Connect the power supply to the
security enclosure (C).
d. Connect the power cord to the
power supply (D).
e. Connect the power cord to the
power source (E).
B
E
C
D
f.
Power on the printer to release
transport mode. The printer beeps
as it powers on. The release
takes approximately 30 seconds.
g. Power off the printer.
O 1
On/Off
CR500 Instant Issuance System
A