- ページ 10

無線アクセスポイント 4IPNET OWL300のPDF クイック・インストール・マニュアルをオンラインで閲覧またはダウンロードできます。4IPNET OWL300 19 ページ。 Outdoor access point

Pole mount

1. Insert the metal strips through the pole mounting gap.

2. Join the two ends of the metal strips and adjust the length for tight fitting around the pole.

2. Connect the OWL300 to your network device.

Connect one end of the Ethernet cable to the Uplink port of OWL300 and the other end of the cable to a

switch, a router, or a hub. OWL300 is then connected to your existing wired LAN network.

3. Power on the OWL300.

OWL300 Uplink port is capable of receiving DC currents. Connect an IEEE 802.3at-compliant PSE device

(e.g. a PoE-switch) to the Uplink port of OWL300 with the Ethernet cable.

Now, the Hardware Installation is complete.

 To verify the wired connection between OWL300 and your switch / router / hub, please also

check the LED indicator of the respective network devices.

OWL300 Outdoor Access Point

Quick Installation Guide

ENGLISH