- ページ 3

送信機 Elsema FMT15108のPDF マニュアルをオンラインで閲覧またはダウンロードできます。Elsema FMT15108 7 ページ。 1, 2, 4, 8-channel 151mhz transmitter

Installation Instructions for FMT15101(E) & FMT15102(E)

Off Delay 2 – 62 seconds

Transmitter will transmit a 1.5 second transmission burst and then stop for the "off delay" time

selected. The "off delay" time is user selectable between 2 to 62 seconds by adjusting trimpot on

the transmitter board. If the inputs change during the "off delay" period the new code will be

transmitted immediately. When the "off delay" time lapses, transmitter will transmit another

burst. The transmitter will cycle (transmission and off delay) indefinitely, if at least one input is

ON and supply is connected.

Off Delay 1 – 10 minutes

Same as mode 1 except the "off delay" is user selectable between 1 to 10 minutes.

Continuous Transmission*

Transmitter will transmit continuously, if at least one input is activated and supply is connected.A

transmission limit of five minutes is used to comply with local radio regulations.

To activate a receiver longer than 5 minutes, use a delay off feature in the receiver (FMR15101) and

transmitter. The delay off feature in the receiver needs to be set more than the transmitter. This

ensures that the transmitter keeps resetting the off delay in the receiver.

1.5 – 10 seconds one burst transmission

Transmitter will transmit one burst and then go to standby or sleep mode. Adjusting the trimpot will

vary the burst length. When the input is changed and supply is connected, transmitter will transmit

one new burst of the new code.

Sleep mode (10 uA) is activated when all inputs are OFF; this applies to all four modes

• Refer to the website for further details.

The transmitter mode for FMT15104 is user selectable by simply setting the 1-Way dip-switch on the

transmitter board.

Transmitter Modes (FMT15104)

Off Delay 2 – 62 seconds

Transmitter will transmit a 1.5 second transmission burst and then stop for the "off delay" time

selected. The "off delay" time is user selectable between 2 to 62 seconds by adjusting trimpot on

the transmitter board. If the inputs change during the "off delay" period the new code will be

transmitted immediately. When the "off delay" time lapses, transmitter will transmit another

burst. The transmitter will cycle (transmission and off delay) indefinitely, if at least one input is

ON and supply is connected.

Continuous Transmission

Transmitter will transmit continuously, if at least one code switch from the 12-Way code switch is

ON and supply is connected. A transmission limit of five minutes is used to comply with local radio

regulations.

To activate a receiver longer than 5 minutes, use a delay off feature in the receiver (FMR15101) and

transmitter. The delay off feature in the receiver needs to be set more than the transmitter. This

ensures that the transmitter keeps resetting the off delay in the receiver.

Transmitter mode for FMT15108 is 5 min Continuous transmission only.

1, 2, 4, 8-Channel 151MHz Transmitter - FMT15101E, FMT15102E, FMT15104E, FMT15108E

(Grey illustrates the position of the DIP switches)

http://www.elsema.com/contitran.htm

ELSEMA