- ページ 4

コントロールパネル Datakom DKG-117のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Datakom DKG-117 12 ページ。 Synchroscope and check synch relay
Datakom DKG-117 にも：ユーザーマニュアル (12 ページ)

ページを印刷する

DKG-117 User Manual

1.3 Wiring the Unit

WARNING: THE UNIT IS NOT FUSED.

Use external fuses for Busbar phase: R, Generator

phase: U, Battery positive: BAT(+).

Install the fuses as nearly as possible to the unit in a

place easily accessible for the user.

The fuse rating should be 6 Amps.

WARNING: ELECTRICITY CAN KILL

ALWAYS disconnect the power BEFORE

connecting the unit.The fuse rating should be 6 Amps.

1) ALWAYS remove the plug connectors when inserting wires

with a screwdriver.

2) ALWAYS refer to the National Wiring Regulations when

conducting installation.

3) An appropriate and readily accessible set of disconnection

devices (e.g. automatic fuses) MUST be provided as part of the

installation.

4) The disconnection device must NOT be fitted in a flexible cord.

5) The building mains supply MUST incorporate appropriate

short-circuit backup protection (e.g. a fuse or circuit breaker)

of High Breaking Capacity (HBC, at least 1500A).

Use cables of adequate current carrying capacity (at least 0.75mm

and temperature range.

V-01

(24.03.2014)

)

- 4 -