- ページ 7

無停電電源装置 Elsist NEMO 2.0 200のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Elsist NEMO 2.0 200 11 ページ。 Nemo2.0 series single- phase line interactive

ページを印刷する
Elsist NEMO 2.0 200 ユーザーマニュアル
NEMO2.0 65 • 80 • 120 • 160 • 200 • 300 • 400
LINE INTERACTIVE
6 –LCD DISPLAY
1.
Input Voltage
2.
Output Voltage
3.
Operation from Mains icon
4.
Operation from Battery icon
5.
Battery level
6.
Low battery
7.
Load level
8.
Overload
9.
Error icon
7 – VISUAL/AUDIBLE SIGNALS
Signals and Alarms on LCD display:
1. Mains ON - UPS OFF
Situation that occurs when the UPS is connected to
the mains but is not switched on. The LCD shows
information but is not backlit.
In this situation, the batteries are in charging mode.
2. Mains ON - UPS ON
Situation that occurs when the UPS is connected to
the power supply and is switched on via the front
panel button. After the end of the beep the LCD will
turn on and the icon "3" will appear to indicate the
operation of the power supply. The UPS is in normal
mode, the load is protected and the batteries are
being recharged.
3. Mains OFF - UPS ON (Network failure/ Battery
Test)
Situation that occurs when the UPS is switched on
and there is an outage (or want to simulate it to
perform the Battery Test). The icon "4" lights up to
indicate battery operation. The batteries are now
feeding the load and are discharging. A beep
indicates the remaining autonomy, the more the
beep's frequency is higher the less the autonomy
time will be. When the battery reaches the end of discharge level, then "6" icon will also start blinking.
Rev. 02 27 Gennaio 2017
7