ページを印刷する
Ⅷ
OPERATION
Turning ON/OFF
Press the power switch (POWER) on the front panel, if the unit is CD state, the unit
will firstly execute closing storehouse, the display will show CLOSE, and the unit
will do self-check. Press the power switch (POWER) again the unit will turn off.
Select CD mode
① Select CD mode
Press the "SOURCE" button on the front panel or press the "SOURCE" button on
the remote control unit to select CD mode.
② Playback
1) Press the " " button, the disc tray slides out.
2) Place the compact disc in the disc tray label-side up.
3) Press the " " button, the disc tray is closed.
4) After the display indicates the number of tracks on the disc and the total time of
the disc, press the " " button on the front panel or the " " button on the remote
control unit to start playing the disc.
If the disc tray is open when you press the " " button on the front panel or press
the " " button on the remote control unit, it will close automatically and start
playing.
Normally, the disc will start playing with the first track. However, you can select a
different track using the skip buttons of the numeric buttons to start playing a different
selection.
③ Pause
1) During playback, press the " " button on the front panel or press the " " button
on the remote control unit to interrupt the playback temporarily.
2) Press the " " button on the front panel or press the " " button on the remote
control unit again to resume playback from the position where pause mode was
entered.
Even when the player is in pause mode, the disc motor is still revolving. Since
leaving the player in this condition can shorten the lifetime of the motor, do not leave
the player in pause mode for a long period of time.
④ Stop
1) During playback or in pause mode, press the"
playing and resets the player.
2) In program mode, press the " " button cancels any programmed selections.
3) In scan mode, press the " " button cancels any scan play
" button to stop a disc that is
7