- ページ 5

キーパッド DataLocker Sentry K300のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。DataLocker Sentry K300 19 ページ。 Encrypted keypad mssd with oled screen
DataLocker Sentry K300 にも：配備マニュアル (10 ページ), レビュアーズ・マニュアル (10 ページ)

ページを印刷する

1. Password Reset

Speciﬁcation

Warranty

Hardware

* Advertised capacity is approximate. Some space is required for onboard software.

** Speed varies with host hardware, software, and usage.

*** Device should be completely dry before use.

Setup

This section will guide you through the necessary steps to set up the Sentry K300 drive. It is highly

recommended that you set a password using alpha-numeric characters.

The default password for the device is set to 1234567. This password allows access to the device

3 times before forcing the user to change it. Once the 3 entries with the default password have

been used, the message "You must change default password" will scroll across the screen until the

password is changed. Press any button to continue to the Change Password screen.

Note: A SafeConsole Factory Reset or initiating a Self Destruct with too many password attempts

will set the password back to the default upon re-initialization.

Button Roles

Enter: Perform a function

Power/Backspace: Press and hold for 3 seconds to power the Sentry K300 on or off. The

device can be turned off while any screen is displayed by pressing and holding the button for 3

seconds. If the device is already on, the button will function as a backspace button, including

returning to the previous screen when the Menu screen is displayed.

Zero/Up: Button will function as a zero (0) when the password is being entered or

changed, or when the Auto Lock timeout and Minimum Password length are being deﬁned. Button

will function as Up on the Selection and Menu screens.

One/Down: Button will function as a one (1) when the password is being entered or

Sentry K300 Managed User Guide

Details

3 years Limited

USB 3.1 Gen 1(SuperSpeed) port recommended.

Backwards compatible with USB 2.0 ports (High

Speed)