- ページ 12

バーコードリーダー Datalogic DS2400NのPDF クイック・リファレンス・マニュアルをオンラインで閲覧またはダウンロードできます。Datalogic DS2400N 20 ページ。 Datalogic laser scanner quick reference guide

DS2400N QUICK GUIDE

ADVANCED SCANNER CONFIGURATION

For further details on advanced product configuration, refer to the complete Reference Manual on the installation

CD-ROM or downloadable from the web site through this link: www.automation.datalogic.com/ds2400n.

The following are alternative or advanced scanner configuration methods:

HOST MODE PROGRAMMING

The scanner can also be configured from a host computer using the Host Mode programming procedure, by

commands via the serial interface. See the Host Mode Programming file on the CD-ROM.

ADVANCED GENIUS™ CONFIGURATION

The ADVANCED selection available when starting the Genius™ program is addressed to expert users being able

to complete a detailed scanner configuration. By choosing this option it is possible either to start a new scanner

configuration or to open and modify an old one. The desired parameters can be defined in the following window,

similar to the MS Explorer:

•

The ID-NET™ network is a built-in high-speed interface dedicated for high-speed scanner interconnection.

ID-NET™ is in addition to the Main and Auxiliary serial interfaces. If you need to install an ID-NET™ network

refer to the DS2400N Reference Manual.

The scanner can also be configured by reading programming barcodes. See the ID-NET™ Setup Procedure

Using Programming Barcodes printable from the CD-ROM.

•

If you need to install a Pass-Through network refer to the DS2400N Reference Manual.

•

If you need to install a Multiplexer network refer to the DS2400N Reference Manual.

•

If you need to install an RS232 Master/Slave (for backward compatibility) refer to the DS2400N Reference

Manual.

Figure 9 - Genius™ Parameter Explorer Window