- ページ 6

コントロールユニット Elsner MSG1-UPのPDF 技術仕様と設置手順をオンラインで閲覧またはダウンロードできます。Elsner MSG1-UP 6 ページ。 Motor control unit

LED flashes: Dead man mode

LED on: Lock mode.

3. To change the mode, please press Up and Down again for 5 seconds.

4. The device leaves the state of readiness for change after 60 seconds of inactivity or

if you press Up and Down again for a short time.

3.2. Individual operation

The manual individual operation of the drive can be performed via an unlocked twin

push button at the manual input. This input is equipped with time-automated buttons.

By a short button stroke, the drive can be exactly positioned (e.g. slats of blinds). At a

longer button stroke (longer than 1 second), the drive travels in lock mode to the end

position. A short stroke on the opposite direction button stops the travel.

Motor Control Unit MSG1-UP • Version: 03.03.2016 • Errors and technical modifications subject to change without notice3

Operation