- ページ 13

電源 Elsner KNX PS640-IPのPDF 取り付けと調整をオンラインで閲覧またはダウンロードできます。Elsner KNX PS640-IP 20 ページ。 Power supply system with ethernet interface

Setting of parameters (Software ETS)

Device name

The KNX PS640-IP can be assigned a name of your choice. The device name should be

descriptive (e. g. Line TF). It is used to search for and recognize a device.

Monitoring bus voltage failure

If a KNX failure is detected, it is reported on the IP. Return of the bus voltage is also

reported.

IP address assignment

Automatic (DHCP): The IP address is automatically assigned on the DHCP, i.e.

additional settings are not required. To be able to use this function, there must be a

DHCP server in the LAN (many DSL routers have an integrated DHCP server).

Manual: In this case, the IP address, the subnet and the gateway IP address must be

entered manually.

[free entry]

disable • enable

automatic (DHCP) • manual