- ページ 8

計測機器 Elsner KNX PYのPDF 技術仕様と設置手順をオンラインで閲覧またはダウンロードできます。Elsner KNX PY 9 ページ。 Pyranometer

ページを印刷する
Elsner KNX PY 技術仕様と設置手順
2.3.4. PCB layout
2.3.5. Mounting the sensor
Close the housing by putting the cover back over the bottom part. The cover must snap
in on the left and right with a definite "click".
Pyranometer KNX PY • Status: 08.03.2016 • Technical changes reserved. Errors reserved.
10
Fig. 13
Make sure the cover and bottom part are
properly snapped together! This picture is
looking at the closed sensor from under-
neath.
Fastening
Installation and commissioning
Fig. 12
1
KNX clamp +/-
2
Programming LED
3
Programming pushbutton for
the teach-in of the device
1
2
3