- ページ 4

コントローラー 4IPNET WHG801のPDF クイック・インストール・マニュアルをオンラインで閲覧またはダウンロードできます。4IPNET WHG801 16 ページ。 Secure wlan controller

System Overview

Front Panel

2 3

Restart / Reset: Press and hold the Reset button for about 5 seconds and the system will restart. Press

and hold the Reset button for more than 10 seconds to reset the system to its default configuration.

LCD Display: Allows network administrator to check important system settings such as network interface,

SZ configurations, etc. The navigation buttons from left to right are "ESC", "Up", "Down", and "Enter".

Console: The system can be configured via a serial console port. The administrator can use a terminal

emulation program such as Microsoft's Hyper Terminal to login to the configuration console interface to

change admin password or monitor system status, etc.

MGMT Port: For Management use only. When connected to a PC via Ethernet cable, the browser always

opens the WMI (Web Management Interface) homepage.

WAN1 / WAN2: Two WAN ports (10/100/1000 Base-T RJ-45) are connected to the external network, such

as the ADSL Router from your ISP (Internet Service Provider).

LAN1 ~ LAN6: Client machines connect to WHG801 via these LAN ports (10/100/1000 Base-T RJ-45).

LED Indicators: There are four kinds of LED, WAN1, WAN2, LAN6, and LAN7, to indicate the traffic

status of the SFP ports.

WAN1 / WAN2 (SFP): Two combo WAN ports (SFP) are connected to the external network, such as the

ADSL Router from your ISP (Internet Service Provider).

LAN 7 ~ LAN12: Client machines connect to WHG801 via these LAN ports (SFP).

10. WAN1 / LAN13 (SFP+): One 10Gigabit SFP+ Port for connection to the external network such as the

ADSL router from your ISP and one for the LAN connection.

WHG801

Secure WLAN Controller

7 8

①

Quick Installation Guide

ENGLISH