- ページ 11

計測機器 elsner elektronik 40111のPDF 技術仕様と設置手順をオンラインで閲覧またはダウンロードできます。elsner elektronik 40111 11 ページ。 Indoor sensor and ventilation control

Installation and start-up

2.3.5. Wiring diagram smoke and heat extraction system

Fig. 9

(Measuring value outputs

only with model TH PF-U)

2.4. Sensor assembly

First, place the windproof box with the supply connection. Then screw the base plate

onto the junction box and position the frame of the switch range on top of this. Connect

the operating voltage and all other connections.

Insert the sensor housing firmly into the metal frame using the catches, so that the

sensor and frame are fixed together.

Never expose the device to water (e.g. rain) or dust. This can damage the electronics.

You must not exceed a relative humidity of 95%. Avoid condensation.

Ventilation Controls TH PF(-U)

Status: 19.04.2016 • Technical Changes and Errors excepted.