- ページ 10

産業機器 AC Air Technology T2のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。AC Air Technology T2 12 ページ。 Tracks world’s first portable, remote-control aircraft tugs

STEP X (using installation tools on tight tracks)

X1. Position the ends of the track at the front of the track rail as shown below.

Then slip the track install tools on the inside and outside adjacent pins to

the missing pin hole. Note: You will need to hold these in place by hand.

Track Install Tool

Missing Pin Hole

X2. While holding the install tools in place manually rotate the motors by hand

to move the track ends to a ﬂ at position as shown below. Then you can

insert the missing pin through the track ends. Note: The pin can not have

a Rotoclip installed while inserting through the install tools.

Track Install Tool

Adjacent Pin

Move Track Until Install Tool is Here

Insert Track Pin Here

Adjacent Pin

Rotate Motor by Hand