- ページ 6
室内装飾品 CB2 chillのPDF 組立マニュアルをオンラインで閲覧またはダウンロードできます。CB2 chill 6 ページ。 Large media console
CB2 chill にも: 組み立て説明書 (4 ページ)
chill
MEDIA CONSOLE
wall mounting assembly
mounting
bracket
C
plastic
anchor
wall
strap
A
small
screw
NOTE:
If you are unsure about your wall type or what
mounting method you should use, consult a
qualified professional or your local hardware store.
For added safety and stability, it is recommended that the wall mounting hardware be installed. For
safe mounting, it is essential to use wall anchors appropriate to your wall type (i.e. plaster, drywall,
concrete, etc.). Mount to wood studs whenever possible.
A) Attach mounting bracket to top of unit using 2 small screws.
B) Determine the final location of unit. Mark position on the wall, approximately 2" below the
mounting bracket mounted to the back of the unit.
C) Drill a hole in the wall stud. If the wall stud is not available, drill a hole in the wall that is slightly
smaller in diameter than the anchor. Gently tap the plastic anchor until the flange of the anchor is
flush with the wall.
D) Attach the mounting bracket to the wall by inserting 2 large screws through the mounting
bracket and into the wall anchor in the wall.
E) Place the unit so the mounting bracket on the back edge is allowed with the wall bracket.
F) Lace one end of the wall strap through both brackets, and into the other end of the strap.
G) Pull the strap tightly until secure.
Repeat step A-G for remaining wall mounting assembly.
Wall mounting assembly is now complete.
Made in Vietnam - r09
D
large
screw
mounting
bracket
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
Page 6 of 6