- ページ 7

スキャナー Datalogic MAGELLAN 3410VSiのPDF 統合マニュアルをオンラインで閲覧またはダウンロードできます。Datalogic MAGELLAN 3410VSi 20 ページ。 Omni-directional imaging scanner

CHAPTER 2

MOUNTING THE SCANNER

This section describes how to design the mounting for optimum scanner performance.

A typical system uses the scanner mounted inside a host enclosure, with an opening for

the scanning pattern to exit and read bar codes. The opening should be the size of the

scanner window at a minimum, but only exposing as much of the scanner as necessary.

Although the scanner has been designed to be impact-resistant, it is important to con-

sider the effect of the environment on the scanner. In particular, mounting should mini-

mize the possibility of foreign objects coming into contact with the window's surface.

Such contact will damage the window over time and reduce the scanner's performance.

Consideration should also be given to the clearances needed for the scanner's interface

cable (reference the following section).

System integration is made easy with the OEM scanner's mounting features. Four

mounting holes are located on the front of the scanner for use with size M3 screws of

your required length.

the position of the mounting features.

The scanner can be mounted upside down with no loss in scanning performance, but

the illumination will be more visible to the operator.

The OEM scanner is not intended for use in a standalone application. This model is

intended to be integrated inside a host enclosure. Standard Magellan 3410VSi models

should be used when a standalone application is required.

When mounting the scanner inside a secondary enclosure, it is important to have

proper ventilation to ensure that the scanner temperature does not exceed the maxi-

mum operating temperature as listed in

be compromised if the temperature range is not maintained.

contains mechanical drawings of the scanner including

Appendix B

Appendix A

. The reliability of the scanner may

INTEGRATION GUIDE