- ページ 5
室内装飾品 CB2 SIDECARのPDF 組み立て説明書をオンラインで閲覧またはダウンロードできます。CB2 SIDECAR 5 ページ。 High dining table
ページを印刷する
sidecar
With the assistance of another adult, carefully
position unit upright as shown. Attach 2 brackets
to left side panel of assembled unit with 2 small
screws per bracket as shown. Secure screws
13
with a screwdriver.
leg/crossbar
assembly
Attach top panel to assembled unit with 8 large
bolts for leg/crossbar assembly and 6 medium
bolts for storage assembly as shown. Secure all
15
bolts with an allen wrench.
cleaning and care
Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. It is recommended to use coasters to protect
surface from heat and water. When moving the assembled table to a new location, it is recommended that the table is picked
up on both sides by 2 adults, carried and gently placed down at the new location. Never drag the table as this could cause
damage.
Made in Thailand - r05
HIGH DINING TABLE
NOTE: Make sure open
part of each bracket
is facing up as shown
top panel
storage
assembly
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
NOTE: Do not
over tighten the
bolts
top
crossbar
leg frame
A. Fit bottom/top crossbars onto corresponding
brackets of assembled unit as shown. Secure
each bracket with 2 small bolts, using an allen
wrench. Do not over tighten the bolts.
B. At the point, fit bottom/top crossbars onto
corresponding brackets of leg frame as shown.
14
Secure each bracket with 2 small bolts.
Insert 6 levelers to bottom of assembled unit as
shown. Turn clockwise to secure/adjust. With the
assistance of another adult, carefully position unit
upright.
16
Assembly is now complete.
A
bottom
crossbar
B
leveler
Page 5 of 5