- ページ 7

自動車バッテリー充電器 4load Charge Box 7.0のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。4load Charge Box 7.0 11 ページ。
4load Charge Box 7.0 にも：ユーザーマニュアル (11 ページ)

ページを印刷する

Before starting device up

for the first time

Clean the battery clips. Make sure that your

eyes do not come into contact with rust.

Ensure sufficient ventilation. Gaseous hydrogen

can leak out when charging or trickle charging

the battery.

Operation

Connection

Connect the connecting cable p or [ to the

connection adaptor ] .

Clamp the "+"-pole (red) y , i of the charger

to the "+"-pole of the battery.

Clamp the "–"-pole (black) u , o of the

charger to the "–"-pole of the battery.

Note: Make sure that the "+"-pole y , i or

the "–"-pole u , o sits firmly.

Connect the power cable r to the mains current.

As soon as you have connected the battery to the

charger, the charger automatically switches to

STANDBY mode. The "POWER" display w glows.

Note: The charger has its own reverse battery

protection. The LED

"+"-pole y , i or "–"- pole u , o has been wrongly

connected.

Disconnecting

Disconnect the power cable r from the mains

current.

Remove the "–"-pole (black) u , o of the

charger from the "–"-pole of the battery.

Remove the "+"-pole (red) y , i of the charger

from the "+"-pole of the battery.

Select mode of operation

Press the "MODE" button q to select the mode

of operation you want to have. The LED for the

mode of operation you want will glow steadily.

Before starting device up for the first time / Operation

"Error" Q shines when the

You can choose between the following modes

of operation:

Mode 1

28.8 V (24 V / 3.5 A):

Suitable for batteries with a capacity of more than

14 Ah in normal conditions. Charging mode for

open batteries, MF and for most GEL batteries.

The LED for Mode 1 } lights up. As soon as

the integrated switch is thrown, the appropriate

LED for the state-of-charge also comes on

(see "State of charge"). The charging process

starts with an amperage of 3.5 A. As soon as

the battery has been fully charged (28.8 V) the

following LEDs light up:

and

T .

The charger changes over to trickle charging.

If the voltage of the battery falls below 25.6 V,

the charging process starts up again with an

amperage of 1.5 A until the battery has been

fully charged again (28.8 V).

Mode 2



29.4 V (24 V / 3.5 A):

Suitable for batteries with a capacity of more than

14 Ah in cold conditions or also for many AGM

batteries (with electrolyte-absorbing mats) with a

capacity of more than 14 Ah.

The LED for Mode 2 { lights up. As soon as the

integrated switch is thrown, the appropriate LED

for the state-of-charge also comes on (see "State

of charge"). The charging process starts with an

amperage of 3.5 A. As soon as the battery has

been fully charged (29.4 V) the following LEDs

light up:

W ,

The charger changes over to trickle charging.

If the voltage of the battery falls below 25.6 V,

the charging process starts up again with an

amperage of 1.5 A until the battery has been

fully charged again (28.8 V).

Mode 3

14.4 V (12 V / 7 A):

Suitable for batteries with a capacity of more than

14 Ah in normal conditions. Charging mode for open

batteries, MF and for most GEL batteries.

The LED for Mode 3 P lights up. As soon as the

integrated switch is thrown, the appropriate LED

W ,

E ,

R and

T .