おもちゃ 4M 00-03426のPDF マニュアルをオンラインで閲覧またはダウンロードできます。4M 00-03426 2 ページ。

ページを印刷する

Motor

Center Axle Spins

Wire Coil

Motion

Force

Generated by

Electro-

magnetic

Induction

Commutator and

Carbon Brush

Battery

E. HOW IT WORKS

Micheal Faraday is not well known to a lot of people today, but his work as a scientist in the 1800's was really remarkable. His

experiments with electricity and magnets, eventually led him to the invention of the electric motor. He continued his work for many years

and began to experiment with different methods to create electricity. He figured out that by passing a magnet through loops of wire, (or

by moving a coil against a magnet) he could generate a current!With the toy motor we used in this kit, wires are coiled around the

center axle. There are magnets placed inside the wall of the motor casing. When the crank or pulley is turned, the center axle spins with

the help of the magnets and a current is produced, which is strong enough to light up the LED lamp. And it all runs smoothly with the

help of the commutator and brush, which connects the circuit to the spinning axle without tangling any wires. We refer to this process as

electromagnetic induction, which is the basis of your Eco-Tech generator! While today's generators are much more powerful than those

Faraday created, the basic theory is still the same as the source of power for your Eco-Tech Bulb!

F. FUN FACTS

Almost a billion people in the world still live without a consistent, reliable source of electricity. They rely on dangerous and expensive

kerosene lamps which pollute the environment. These lamps not only take up a large portion of a family's income, but also prevent

children from learning as the kerosene fumes can cause headaches and eye strain. The technology inside the EcoTech Bulb doesn't

require sunlight, oil or a battery to work, providing a environmentally friendly and cheap alternative to kerosene lamps. Access to light

through this powerful and innovative design will help lift millions of people out of poverty in the future.

G. TROUBLESHOOTING

If the LED does not turn on in Gravity-Powered Mode:• Fill the water bottle up with more water to increase the weight and force put on

the gearbox. • Make sure the button is pushed all the way towards the wire side of the gearbox. Do not push the button when the water

bottle is connected to the gearbox. If the LED does not turn on in Hand-Powered Mode:• Make sure to turn the handle clockwise when

using your right hand to operate the light. • Check if the button is pushed all the way towards the handle side of the gearbox.Also check

the following:• Check if the red and black wires from the motor and light are matched with the same colour within the terminals. Make

sure the black and red wires are secured properly by pegs in the two terminals. • If it is difficult to push the button to change the mode

on the device, slight turn the crank to realign the gears. The button should push smoothly through once the gears are aligned.

QUESTION AND COMMENTS

We treasure you as a customer and your satisfaction with this product is important to us. In case you have any comments or questions, or you find any

parts of this kit missing or defective, please do not hesitate to contact our distributor in your country, whose address is printed on the package. You are

also welcome to contact our marketing support team at Email: [email protected], Fax (852) 25911566, Tel (852) 28936241, Web site: WWW.4M-

IND.COM

Eco-Tech Generator

(2-Modes)

HAND POWERED MODE

MAGNET (NORTH)

Wire Coil

Current Generated by

Electro-magnetic

Induction

Commutator and

Hand Crank

Carbon Brush

MAGNET (SOUTH)

GRAVITY-POWERED MODE

MAGNET (NORTH)

Pulley

Wire Coil

Current Generated by

Electro-magnetic

Induction

Commutator and

Carbon Brush

MAGNET (SOUTH)

ECO-TECH BULB

A. SAFETY MESSAGES

1) Adult assistance and supervision is required at all times. 2) This kit is intended for children over the age of 5. 3) This kit and its

finished product contain small parts which may cause choking if misused. Keep away from children under the age of 3. 4) Do not shine

the light directly into anyone's eyes. 5) Do not stand under the water bottle to avoid any head injuries. 6) Do not push the mode-

changing button when the water bottle is connected to the gearbox.

B. CONTENTS

Part; A: Gearbox, B: Wire Cover, C: Bottle Connector (Left), D: Bottle Connector (Right), E: Motor Cover, F: Motor, G: Handle Joint, H:

Bulb Cover, I: LED Light, J: Handle, K: Peg, L: Small Screw, M: Washer Screw. Also required but not included: A recycled 1 litre (35

ounce) water bottle and a small crosshead screwdriver.

WARNING:

PLEASE SCAN THE QR CODE TO VIEW MULTI-LANGUAGE INSTRUCTIONS

CHOKING HAZARD - Small parts.

Not for children under 3 years.

TO PARENTS: PLEASE READ THROUGH THESE

INSTRUCTIONS BEFORE PROVIDING GUIDANCE

TO YOUR CHILDREN.