ページを印刷する
Tool Use and Care
Use clamps or other practical ways to secure and support the work-piece to a stable platform.
Holding the work by hand or against your body is unstable and may lead to loss of control.
Do not force tool. Use the correct tool for your application. The correct tool will do the job better
and safer at the rate for which it is designed.
Do not use tool if switch does not turn it on or off. Any tool that cannot be controlled with the
switch is dangerous and must be repaired.
Remove the battery packet before making any adjustments, changing accessories, or storing
the tool. Such preventive safety measures reduce the risk of starting the tool accidentally.
Store idle tools out of the reach of children and other untrained persons. Tools are dangerous in
the hands of untrained users.
Maintain tools with care. Keep cutting tools sharp and clean. Properly maintained tools with
sharp cutting edges are less likely to bind and are easier to control.
Check for misalignment or binding of moving parts, breakage of parts, and any other condition
that may affect the tool's operation. If damaged, have the tool serviced before using. Many
accidents are caused by poorly maintained tools.
Use only accessories that are recommended by the manufacturer for your model. Accessories
that may be suitable for one tool may become hazardous when used on another tool.
Service
Tool service must be performed by qualified repair personnel only. Service or maintenance
performed by unqualified personnel could result in a risk of injury.
When servicing a tool use only identical replacement parts. Follow instructions in the
Maintenance section of this manual. Use of unauthorized parts or failure to follow Maintenance
instructions may create a risk of electric shock or injury.
ADDITIONAL SAFETY POINTS FOR YOUR JIG SAW
Remove the plug from the socket before carrying out any adjustment, servicing or
maintenance.
When an extension cable is required you must ensure it has the correct ampere rating for your power
tool and is in a safe electrical condition. Fully unwind cable drum extensions to avoid potential
overheating.
Ensure your mains supply voltage is the same as indicated on the rating plate.
Your tool is double insulated for additional protection against a possible electrical insulation failure
within the tool.
Always check walls, floors and ceilings to avoid hidden power cables and pipes.
After long working periods external metal parts and accessories could be hot.
Wear eye protection when operating this tool.
The base plate must always be held firmly against the material being cut to reduce saw vibration,
blade jumping and blade breakage.
If possible, ensure the workpiece is firmly clamped to prevent movement.
Your Jigsaw is a hand held tool, do not clamp your jigsaw.
Before cutting, check the cutting line is free of nails, screws, etc.
Never stop the cutting blade by applying side pressure to the blade.
Only withdraw the blade from the cut when the blade has stopped moving.
Only use blades in excellent cutting condition.
2