- ページ 9

プリンター Datamax PrintPAD CN70のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Datamax PrintPAD CN70 14 ページ。
Datamax PrintPAD CN70 にも：クイック・スタート・マニュアル (2 ページ)

ページを印刷する

Audio Indicators

Beep(s)

Printer wakes up.

Out of paper.

Low battery.

1 short

RF power is on (when blue, RF power button is pressed and

power was turned off).

2 short

RF power is off (when blue, RF power button is pressed and

power was turned on).

1 long

Boot code is starting or restarting (when downloading new

firmware).

8 short

CRC error in firmware.

Radio LED

Blue flash - slow

Blue flash - fast

Off

Power LED

Off

Red flash

Green

CardReader Audio Indicators

Magnetic

Beep(s)

1 long

2 short

Using DEX/UCS Capabilities

Figure 15

The direct exchange (DEX)/UCS port can only be used with the Datamax-O'Neil approved DEX cable (P/N 210237-

xxx). When the DEX cable is plugged into the data port, the printer automatically turns off to allow data transfer

between the handheld and the DEX port. Remove the DEX cable to resume connection to the printer.

Note: Do not unplug the cable in the middle of a data transfer session.

Your application needs to be programmed to communicate in the DEX/UCS language.

Description

RF power is on and printer is asleep.

RF power is on and printer is awake.

RF power is off.

Description

Printer is asleep.

Paper out.

Unit is awake.

Description

Bad read.

Good read.

DEX/UCS port

None.

Install paper.

Charge battery.

None.

Redownload firmware.

Action

None.

PrintPAD CN70 USER'S GUIDE

Action