- ページ 9

バーコードリーダー Datamax H-ClassのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Datamax H-Class 10 ページ。 Cutter option
Datamax H-Class にも：マニュアル (8 ページ), クイック・スタート・マニュアル (12 ページ), マニュアル (14 ページ), マニュアル (12 ページ)

4. Press the Latch to open the Peel and Present Assembly. Then remove the C-Clip that secures the

Upper Roller Shaft to the Front Cover.

Latch

5. Remove the Upper Roller Shaft and the associated Rollers.

6. Using a Cotton Swab dampened with alcohol, wipe all Roller and Upper Roller Shaft surfaces

clean. Pay special attention to the ridges on the Rollers to ensure that they are clean.



Note: For cleaning heavy deposits from the Rollers and Shafts in the following steps, WD-40

or another non-damaging adhesive remover can be substituted for isopropyl alcohol –

provided this adhesive remover is carefully applied using a cotton swab.

7. Slide the Rollers back onto the Upper Roller Shaft, place the components into the Front Cover,

and reinstall the C-Clip.

C-Clip

Front Cover

Upper Roller

Shaft

Upper Roller

Shaft

Rollers