- ページ 13
ストレージ DataON DNS-1640SのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。DataON DNS-1640S 20 ページ。 2u 24 bays 6gb/s sas jbod dual-path, dual i/o
- 1. User Manual
- 2. Package Content
- 3. System Requirements
- 4. Technical Support
- 5. DNS-1640 Overview
- 6. DNS-1640 (Single SIM) Rear View
- 7. DNS-1640 (Dual SIM) Rear View
- 8. DNS-1640 PSM Board LED Description
- 9. Disk Drives Front LED and Tray
- 10. Install/Replace HDD
- 11. Before You Begin
- 12. Setting up DNS-1640 System
- 13. Connecting Power to DNS-1640
- 14. Power on the DNS-1640
- 15. Features and Specifications
Before You Begin
Before you set up the DNS 1640 system, be sure your facility meets the following
Important:
conditions.
Confirm that there is adequate power at your facility to support the high-availability features of the system.
It is recommended to connect each power connector to separate power circuit.
If necessary refer to the documentations shipped with the 6Gb/s SAS HBA/RAID card for hardware and
driver installation instructions
There are different types of SAS Cables in the market, make sure you order the right one for DNS-1640.
For DNS-1640, it all uses SFF-8088 to SFF-8088 SAS Cable when connecting DNS-1640 to host and when
daisy chain to another DNS-1640.
SFF-8088 to SFF-8088 SAS Cable
DNS-1640 User Manual
12