- ページ 2

PCIカード Datapath VisionSDI2のPDF マニュアルをオンラインで閲覧またはダウンロードできます。Datapath VisionSDI2 2 ページ。 Dual 3g-sdi capture card
Datapath VisionSDI2 にも：ユーザーマニュアル (15 ページ)

ページを印刷する

PACKING LIST

Your packing box should contain the following items:

The VisionSDI2 capture card.

(For latest drivers go to www.datapath.co.uk).

NOTE:

All plug-in cards are static sensitive and are packed in

antistatic materials. Please keep the card in its

packaging until you are ready to install.

HARDWARE INSTALLATION

You are likely to need a flat blade and a Phillips head

screwdriver for the installation of the VisionSDI2 card; it

would be useful to have these to hand before you begin.

Power down the PC (including peripherals), switch off at

the mains and disconnect all the cables connected to the

computer, noting the positions for accurate reconnection.

Remove the PC cover.

Locate a vacant PCI Express slot (x4 or higher) on the

motherboard and remove the backing plate (retain all

screws).

If in doubt consult your motherboard documentation to

correctly identify a PCI Express slot.

If in doubt consult your motherboard documentation to

correctly identify a PCIe (PCI-express) slot.

Remove the VisionSDI2 card from its packaging and secure

it firmly into the empty PCI Express slot.

Reconnect all cables to the PC then connect the cable

distributing the DVI signals to the green connectors on the

VisionSDI2 card located on the back panel .

SOFTWARE INSTALLATION

Download the the required driver install.exe from the

Support pages on the Datapath website and follow the

Installation Wizard instructions as prompted.

We suggest that you regularly visit the Datapath web site

for information on updated drivers.

www.datapath.co.uk

It is strongly recommended that you read the detailed

help instructions on completion of the installation. Each

help topic may be printed for ease of use.