- ページ 11
ネットワーク・ハードウェア Dataprobe iBootのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Dataprobe iBoot 16 ページ。 Web enabled remote power control
Dataprobe iBoot にも： マニュアル (20 ページ)
ページを印刷する
iBoot
Page 11
Web Browser Operation
Password Protection:
Open your browser and access iBoot by entering the default
(192.168.1.254) or current IP address into your browser's
Address window. Upon connection to iBoot, a password is
required. A username is not required.
The default Password is PASS. This can be changed from the
setup screen. Remember your password.
iBoot also uses an inactivity timer for security. When there is no
activity for 2 minutes, the connection is closed and the password
will need to be entered again for access.
Main Screen
Once the password is entered, the following page is displayed.
Location ID
Power Status
Action
Buttons
Power Cycle
Time
Auto Ping
Click for
Setup
To control the power, click on the appropriate button. During
power cycling, the Power Status bar will indicate the temporary
status, with a blue background. Once the cycle is complete, the
status bar will revert to its original condition. To abort a power
cycle, click on either Power On or Power Off buttons. iBoot will
immediately assume the status selected.