ネットワーク・ハードウェア Dataprobe MP-420のPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Dataprobe MP-420 8 ページ。 Tone controlled power strip with multipal voice response

ページを印刷する

QUICK START

Plug a phone line into the jack marked LINE

Plug the A/C line cord into an outlet.

The MP-420 requires a 20 service feed and NEMA 5-20R outlet.

Connect any A/C powered devices into the outlets on the MP-415, MP-420.

The maximum current rating for all of the devices connected to the

MP-415 cannot add up to more than 12 Amps.

The maximum current rating for all of the devices connected to the

MP-420 cannot add up to more than 16 Amps.

4) Call the phone number connected to the unit. The switch will answer with "PAL READY"

5) Enter '1' The MP-4xx will respond with ' 1 On'

6) Enter '#' Outlet 1 will turn off and the MP-4xx will respond with '1 Off '

7) Repeat steps 5 and 6, entering 1 - 4 for the desired outlet.

8) Hang up when finished

9) Read the rest of the manual. There are many more features and options.

GENERAL DESCRIPTION

The MultiPAL Remote Controlled

Power Strip, models MP-415 and

MP-420 allow an operator with a

tone dial telephone to access,

interrogate and control four A/C

power outlets. (Except were noted

both models will be refered to as

the MP-415 in this manual) Each of

the four outlets on the MP-415 can

be independently turned on, off or

pulsed for power-on reset. The

unique MultiPAL controller allows

the switch to be placed in series with any normal telephony device (phone, fax, modem, etc.). Normal

calls can pass transparently through MP-415; only when you enter a DTMF (touch tone) code, will the MP-

415 respond and allow switch control.

To operate the MP-415, place a telephone call to the dial line connected to the unit. The MP-415 provides

three call answer modes and several security options. When the call is validated, MP-415 will read off the

current status of the switch and then prompt the caller to change the switch position. When a change is

made, the new status is repeated and additional changes can be made. When no more changes are

required, the caller can hang-up, or send an additional code to access any extension device connected to

the MP-415.

REF: PWR\MP-415_V030613D.DOC

"Switch 1

i s O N "

Dial Line

Technical Support Hotline: (201) 967-8788

Technical Support: 201-934-5111

Main: 201-934-9944

Tone Controlled Power Strip

With MultiPAL Voice Response

Model MP-415, MP-420

Call Pass-thru

[email protected]

Website: dataprobe.com

Expansion to 4

Additional Outlets

4 Power Controlled

D e v i c e s