- ページ 3

自動車アクセサリー AGRI-COVER Lomax StanceのPDF 取付説明書をオンラインで閲覧またはダウンロードできます。AGRI-COVER Lomax Stance 13 ページ。

ページを印刷する

1: INSTALLING SIDE RAILS

NOTE: Some installs require special

instructions. If required, follow special

instructions for side rail attachment along

with these standard instructions.

A. Position side rail with weather strip

against inside lip of box, safety strap hole

toward front of box and side rail guide set

on top of box. Push side rail forward until it

touches front of box.

B. At front, hold side rail with assistance of

another person or a spring clamp.

C. Install first clamp as close to front of

box as possible with clamp orientation that

provides best grip, turn nut finger tight, then

use 1/2" wrench to tighten.

IMPORTANT: To keep side rail secured

on truck, ensure clamp teeth engage

grooves on side rail.

NOTE: Images below illustrate clamping options. Option A depicts standard clamping

orientation lower on the side rail. Option B depicts alternate clamping orientation with

half of clamp assembly rotated 180° to provide better grip at top of side rail.

D. Verify side rail is level. If side rail is not level, perform one of the following:

If side rail tilts up: loosen and lower clamp, engage teeth and then retighten clamp.

If side rail tilts down: loosen and raise clamp, engage teeth and then retighten clamp.

Side rail guide set

on top of box

OPTION A

This surface of

side rail should

be level

Adjust clamps

up or down until

they hold side

rail level when

tightened

Side rail touching

front of box

Side rail guide provides proper side

rail placement

Position 1

clamp as close

to front of box

as possible