- ページ 3

錠前 Aurus PN-19RFのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Aurus PN-19RF 5 ページ。 Pin + rfid cabinet lock
Aurus PN-19RF にも：インストール手順 (2 ページ)

ページを印刷する

C. Lock and unlock using card and password

 Use Password to Unlock

For the first time input the default factory password "1234+ OK" or input the factory default



management password "12345678+OK"

 You will hear a beep and the green LED

 The lock will unlock.

 The Latch will come out automatically after 5s to lock.

Note: - in case of wrong password, you will hear 3 beeps signaling the wrong passwords.

In case of low voltage/battery the lock show this sign

The user and the management password cannot be same.

 Use Card to Unlock



Show the registered card near the card inductive zone icon



You will hear a beep and the green light



The lock will unlock.

Note: - in case the card is unverified, you will hear 3 beeps.

D. How to Change Management password.

 Input the current management password "12345678 + C''



You will hear a beep and the green light



Enter the new Management password you wish to set



Press "Ok"



You will hear a beep implying that you have successfully changed the password.



Verify the working with the new password while the drawer/cabinet is open.

E. How to Change User password.

 Input the current user password "1234 + C''



You will hear a beep and the green light



Enter the new user password you wish to set



Press "Ok"



You will hear a beep implying that you have successfully changed the password.



Verify the working with the new password while the drawer/cabinet is open.

IMP: - Check the locking and unlocking of the lock while the

DRAWER/CABINET IS OPEN. The Pin should consist of 4-15 digits.

flashes.

is on.

flashes quickly