- ページ 11

コントロールユニット Dataq Instruments DI-188のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Dataq Instruments DI-188 13 ページ。 4-channel open source usb data acquisition starter kit

ページを印刷する

3. Installation

DI-188 Starter Kit (basic) does not include USB-C cable. Verify that you have the following:

•

A DI-188 USB data acquisition instrument.

If the item is missing or damaged, call DATAQ Instruments at 330-668-1444. We will guide you through the appro-

priate steps for replacing missing or damaged items. Save the original packing material in the unlikely event that your

unit must, for any reason, be sent back to DATAQ Instruments.

Installing W

All software for the DI-188 can be installed via a downloadable executable directly from the DATAQ Instruments

web site. No CD is shipped with the device. You may burn the executable onto a CD or flash drive to transport the

software to a computer with no internet connection.

Disconnect all DATAQ Instruments USB devices from your Computer.

Download software at run.dataq.com.

Save the executable (Dataq Software Suite Web Setup.exe) to your local hard drive.

Double-click on the executable to extract the program and begin software installation.

Follow the on-screen prompts and enter all required information.

Software installation is complete - you will now see a "Successful Installation" box - click OK to exit W

Installation.

You can now plug the device(s) into your PC. Click on the "WinDaq Dashboard" shortcut to access W

ware.

Software

Installation

DI-188 Hardware Manual

soft-