- ページ 10

リモコン AGRI-COVER Command-10のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。AGRI-COVER Command-10 17 ページ。

Optional Instructions to Program

Auxiliary Remotes

STEP 1

Create a Auxiliary Remote

Open cover to unlock remote. Push and hold Select button then push and

hold Programming button while Select button is still being held. Hold both

buttons until indicator light flashes red. Release both buttons. Press CLOSE

button. Indicator light will fast flash red, then be steady green. Auxiliary

Remote has been created. Close lid to power down and lock remote.

STEP 2

Sync Primary and Auxiliary Remotes

Place both remotes next to each other and open lids on both remotes.

Primary Remote will flash slow green, Auxiliary Remote will flash fast red

then switch to steady green. On Primary Remote tap Programming button.

On Auxiliary Remote press and hold Programming button until indicator

light flashes fast green. Release Programming button on Auxiliary Remote.

Indicator light will flash slow green and programed modes will be steady red.

Auxiliary Remote is now programmed to same functions as Primary Remote.

NOTE: Multiple remotes can be synced to the Primary Remote, but the

Primary Remote must be used to create all new remotes.

STEP 3

Automatically Update Previously Synced Transmitters

Once synced with the Primary Remotes, Auxiliary Remotes can automatically

be updated if there are any changes to the Primary Remote. Place both

remotes next to each other and open lids on both remotes. After 5 seconds

the Auxiliary Remote will be updated to all functions of the Primary Remote.