- ページ 10

体重計 ADE M111600のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。ADE M111600 12 ページ。 Electronic hanging baby scale
ADE M111600 にも：取扱説明書 (8 ページ), 取扱説明書 (4 ページ)

Hold function

The scale is equipment with an automatic hold function. The weight of the baby will automatically be

locked in the display during each single weighing cycle. You can take the baby off the scale and

read the weight on the display for 60 seconds. In order to unlock the weight, press the HOLD key

again. The scale will fully automatically re-weight if the baby is still placed at the scale or will show

zero.

Cleaning

For cleaning just use a damp cloth or common disinfection products. Do not use any aggressive

cleaning fluids. Make sure no water or cleaning fluid penetrates the scale.

Fault messages

If LOBAT is displayed, please replace the batteries. Always use two new batteries.

In case the scale does not show `0.00´ after having been started, press TARE to find the zero point.

In case of faulty results:

1. Make sure batteries are inserted correctly.

2. Make sure you are in the weighing mode you selected (kg / lb / oz).

3. Do not load the scale before the display shows `0.00´.

Disposal

Electronic devices are no domestic waste.

If the scale is out of use the responsible waste disposal association will be glad to

advise you on the measures necessary to dispose of it properly.

Make sure only discharged rechargeable batteries respective rechargeable batteries

with isolated poles will be disposed as otherwise short circuits may occur.

Warranty – Liability

ADE will repair or replace this product within a period of 2 years from date of delivery applying to

defects occurred due to poor material or workmanship (presentation of invoice is necessary). All

moveable parts – batteries, cables, mains units, rechargeable batteries etc. – are excluded.

Warranty does not include natural wear, damages caused by incorrect or negligent handling,

overuse or unsuitable or improper storage. The cost of transport will be borne by the customer

should the equipment be located anywhere other then the customer's premises. In the event of

transport damage, claims under warranty can be accepted subject to using the complete original

packaging and the equipment secured the way it was packed and secured originally. All the

packaging should therefore be retained.

Any warranty claim will be rejected if the equipment is opened by persons not authorized

expressively by ADE to do so.

Customers abroad are kindly requested to contact their local dealer for any warranty claim,

customer service and spare parts.

Cleaning and maintenance

M111600-230324-Rev007-UM-de-e