- ページ 3

自動車アクセサリー DV8 OFFROAD CCBR-01のPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。DV8 OFFROAD CCBR-01 4 ページ。 Center console and bridge for ford bronco

INSTALLATION

MANUAL

STEP

Use a 11/32" drill bit to drill out the marked

mounting positions.

Drill accurately and carefully to avoid scuff-

ing the trim unnecessarily.

STEP

Align the driver side mount with the mount-

ing holes and press the M6x15 hardware

into the drilled out holes, to loosely hold

the mount in place. Pull back on the center

console trim from the bottom to fit the M6

nuts into place.

Thread the nut onto the m6 bolt two or three

threads only, secure with a 4mm allen bit

while applying pressure with your hand un-

der the center console until the nut "catch-

es" and tightens.

Repeat this process for the other three bolts

until the driver side mount is secure.

STEP

Repeat steps 1-4 with the passenger side

mount. The top of the mount will align with

the center console trim and grab bar handle.

NEED HELP?

855-680-9595