- ページ 5

冷蔵庫 AUSRANVIK APR-25DのPDF ユーザーマニュアルと製品仕様をオンラインで閲覧またはダウンロードできます。AUSRANVIK APR-25D 9 ページ。

3.3 Control Panel Operation



Plug the car fridge to a AC 110V power source by the adapter, or DC 12V power

source of the cigarette lighter socket in a car, the car fridge will start to work

automatically. Factory default setting is displaying Fahrenheit degree, ECO mode, and

batter protection at H level.



Three seconds without any operation, the control panel will automatically locked. In

order to set your desire temperature, or change the work mode, or battery protection

level, you must touch and hold the Unlock Button for three seconds to unlock the

panel firstly, the lock icon in the display will disappear, then you are allowed to set

your desire temperature, or mode, or battery protection level accordingly.



Touch and hold the Power Switch for three seconds to turn off/on the fridge.



Touch the Setting Button lightly, you will switch the work mode between MAX and

ECO. MAX mode means fast cooling, and it will consume a lot of energy from battery;

ECO mode means energy saving, it will not consume as much energy but it can not

reach your desire temperature fast.



Touch and hold the Setting Button for three seconds, the wording H, M, L wording

below the battery icon starts flashing, then touch the Setting Button lightly you will

switch the battery protection level between H, M, and L, which means High, Middle

and Low level respectively. When connecting to the car battery, the battery icon in the

display will change its status to indicate the car battery's electric quantity.

Temperature Display

Power Switch

Setting Button

Temperature Up Button

Temperature Down Button

Unlock Button

USB Port