- ページ 4

冷蔵庫 AUSRANVIK APR-50BのPDF ユーザーマニュアルと製品仕様をオンラインで閲覧またはダウンロードできます。AUSRANVIK APR-50B 8 ページ。

3. Operation

3.1 Power supply: 12/24V DC or 110~240V AC （enclose adapter）.

3.2 Power cable connection:

3.3 Control Panel Operation

3.3.1 Connect to the power supply, the compressor protection program will delay the

compressor from working in the first three minutes, during this three minutes, the indicator is

RED, and the display is on and you can set the temperature, or working mode, or car battery

protection level according to your desire. You can also long press ON/OFF button to turn off

the refrigerator, it will not start working until you long press the ON/OFF button again (and still

you need to wait three minutes for the compressor to kick in).

3.3.2 The compressor starts to work three minutes after connecting to the power supply, and

the refrigerator interior starts to cool down.

3.3.3 Factory default working mode is MAX (fast cooling), indicator in RED color, default

battery protection level is "High".

3.3.4 Press UP or DOWN button lightly to set your desire temperature. When setting

temperature, the digit number keeps flashing; three seconds without any operation, the digit

number stops flashing and resume to read the real temperature interior.

3.3.5 Press SET button lightly to switch the default MAX mode to ECO mode. Every time you

press SET button lightly you will switch between MAX and ECO mode. MAX mode means

Fast Cooling, and it will consume a lot of energy from battery; ECO mode means energy

saving, it will not consume a lot of energy but it can not reach your desire temperature fast. In

Max mode, the indicator light is RED color, in ECO mode, the indicator light is GREEN light.

3.3.6 Press SET button and UP (or Down) button at the same time, you will switch the

battery protection level between H, M and L.