- ページ 8

高圧洗浄機 Aussie Concept F140のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Aussie Concept F140 13 ページ。 Domestic cold water high pressure cleaner

ページを印刷する
Aussie Concept F140 取扱説明書
BLEEDING PUMP
-
Turn water supply on (accessories must be assembled as described above)
-
Bleeding of pump requires the operator to have the high pressure gun trigger pulled while
the machine is turned off.
-
When the trigger is pulled and the water supply is turned on, this should give a constant
water supply coming through the machine while it is turned off.
-
Only switch machine on after water supply is turned on and the operator has bled water
through the pump.
-
Please note this procedure should be performed on each initial use.
SWITCHING ON MACHINE
-
Set black switch to ON position
vary.)
-
Point gun at object to be cleaned.
-
Press safety latch to unlock spray gun.
-
Point nozzle down.
-
Squeeze trigger, adjust vario nozzle to desired pressure.
-
Motor switches off when trigger released, motor will re-engage
when trigger is pulled.
-
(This safety feature is called the Total Stop function.)
SWITCH OFF MACHINE
-
Turn switch to OFF position.
-
Turn off water.
-
Release pressure in spray gun by pressing trigger until
water only drips from the spray head.
-
Release trigger on gun.
-
Press safety latch on gun
trigger and prevents accidental triggering.
-
Unplug machine from power point.
-
Disconnect water supply hose from machine.
NOZZLE ATTACHMENTS
Each Aussie Eco-Clean pressure cleaner receives 2 nozzle attachments.
-
Nozzle Attachment 1 – Vario Nozzle
The vario nozzle can be twisted in either a clockwise or anti-clockwise direction, which will
either give a pin jet spray pattern or a fan jet spray pattern. The fan spray option will
regulate the pressure of the machine.
Nozzle Attachment 2 – Turbo Nozzle
-
The turbo nozzle is a non-adjustable nozzle pattern which comes out in a conical (cone
shaped style pattern). This different style of pattern allows quicker cleaning of large surface
areas including paved areas, concrete areas, driveways, etc.
Page 8 of 12
START UP PROCEDURE
. (Switch types may
(Fig. 5A)
(Fig 5A.)
. This locks gun
(Fig. 5B)
Concept F140 Cold Water Pressure Cleaners – March 09
Fig. 5A
Fig. 5B
Fig. 6a
Fig. 6b