- ページ 5

高圧洗浄機 Aussie Monsoon 100のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Aussie Monsoon 100 16 ページ。 Monsoon series

ページを印刷する

March 2018

1. NEVER direct the spray jet at any person or animal.

Keep hands and feet clear of the cleaning nozzle at

all times.

2. NEVER direct spray jet at any surface that may

contain asbestos material.

3. NEVER hold a finger over the high pressure nozzle.

4. NEVER direct the spray jet at the machine itself or

any electrical equipment.

5. After use release the pressure in the high pressure

hose by operating the gun trigger.

6. DO NOT attempt any mechanical repair. If you have

a problem with your machine contact your local

Aussie Eco Clean Service Division, phone (02)

8865 3500.

7. NEVER supply any liquid other than water to the

pump inlet.

8. DO NOT run dry

9. NEVER pull the high pressure hose if it has formed

kinks or nooses.

10. NEVER pull the hose over sharp objects.

Model

Pump Pressure (psi)

Monsoon 100

1600 (110 BAR)

Monsoon 140

2000 (140 BAR)

Aussie Monsoon Single Phase Blasters ... Operation & Maintenance Manual

SAFETY PRECAUTIONS - IMPORTANT

11. DO NOT join high pressure hoses. The connectors

12. DO NOT attempt to disconnect any hose or

13. DO NOT operate the machine whilst standing on

14. Operate in well ventilated areas only.

15. DO NOT operate if power cable is damaged,

16. DO NOT try to repair a leak in the hose or

17. DO NOT substitute any component part on this

18. Children should NOT be allowed to use the

19. We recommend the use of safety goggles and steel

SPECIFICATIONS

Pump model

EWP

WBL1114

2800

WBL917

3400

may leak and cause the unloader to wear

prematurely. Buy extra length hoses if extended

range required.

coupling with pressure still in the hose.

ladders, use a platform tower or scaffolding.

contact a certified electrician for replacement.

connection while the system is under pressure.

machine. Use of incorrect parts could cause serious

personal injury.

machine.

cap boots when using the machine.

Flow rate (lpm)

Motor

3HP 2.2kW, IP56

* NB: Performance using 15 amp plug option

Aussie Pumps

Pump rpm

Weight (kg)

1450