ページを印刷する5. Click on "Change adapter options". A tab with all the network resources will
appear (Fig.5).
Fig. 4
6. Position the mouse on Ethernet, press the right button and select "Properties".
7. From the Ethernet properties menu (Fig.6), select "Internet Protocol version 4
(TCP / IPv4) and press the "Properties" button which will be enabled in the
meantime. The screen in Fig. 7 will open.
8. Make a note of all the settings present that you will need later for the reset.
9. Set the IP address on 192.168.1.101
10. Set Subnet mask to 255.255.255.0 and confirm with OK.
11. At this point you can open the WEB browser and type 192.18.1.101 to
configure MDB-E.
Fig. 6
Fig. 5
Fig. 7
8