- ページ 2

バッテリーチャージャー Dataton 3549のPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Dataton 3549 2 ページ。
Dataton 3549 にも：クイック・スタート・マニュアル (2 ページ)

USING THE CHARGER

Power up

Plug the DC adapter into

a power socket and connect it to the

charger. The charger requires exter-

nal power in order to work; there is

no built-in battery.

Transfer files

Prepare audio files

according to the PICKUP PRODUCER

MANUAL. Plug the USB cable (includ-

ed) into the charger, making sure you

push it in all the way. Connect the

other end of the cable to a USB port

on your computer.

Insert up to seven PICKUP audio

guides into the charger. The audio

guides will be listed with their serial

numbers as individual mass storage

devices on your computer.

Select your audio tour files and copy/

drag them to each of the devices (the

PICKUP units). The lights on the top

of the PICKUP units will start flashing,

indicating that copying is in progress.

Eject PICKUP

When the PICKUP units

show a pulse or steady light, eject

the devices from the computer and

disconnect the USB cable.

All manuals and user guides at all-guides.com

Charge PICKUP units

top of the PICKUP indicates the cur-

rent status of the units in the charger.

Fast flash: Transfer in progress. Audio

files are being downloaded from your

computer to the PICKUP unit. Do not

remove PICKUP from the charger.

Pulse: Charging in progress. OK to

remove PICKUP.

Steady light: Fully charged. OK to

remove PICKUP.

Important

Audio tour files are stored

on the PICKUP units, not the charger.