- ページ 4

高圧洗浄機 Aussie Pumps BB100 Hire SeriesのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Aussie Pumps BB100 Hire Series 16 ページ。 High pressure blasters

Aussie Pumps

21. DO NOT operate this machine when you are fatigued.

22. Never modify your machine in any way.

23. Have a thorough knowledge of machine's controls. Ensure you know how to

stop machine and release pressure quickly.

24. Always hold spray gun and lance firmly with both hands so you maintain full

control.

25.

We recommend the use of safety goggles and steel cap boots when using

the machine.

Electric drive machines only ...

26. The electrical power voltage must agree with the voltage specified on label

on base of machine. [Note: Improper connection will damage machine and

void warranty.]

27. The machine must be grounded.

appropriate outlet that is properly installed and grounded in accordance

with all local codes and ordinances.

28. Do not modify the plug provided with the machine. If plug does not fit your

outlet have a proper outlet installed by a qualified electrician.

29. Electric cables should not be left in a position where water can come into

contact with the electric cable. Always keep electrical connections dry and

off the ground

30. Do not use any type of double adaptor or multiple socket power board with

this product.

31. Use only extension cords having an electrical rating not less than the rating

of the product. An improper gauged extension cord will cause drop in wire

voltage resulting in loss of power and overheating. Use only extension

cords that are intended for outdoor use. These are identified by a marking

"Acceptable for use with outdoor appliances."

32. Do not touch plug with wet hands.

33. Disconnect the plug from power supply and relieve pressure to hose before

attempting any work on the machine.

34. To avoid damage to power cable do not roll, crush or pull it.

35. The power cable may only be repaired or replaced by a qualified

electrician.

The plug must be plugged into an

Aussie BB Hire Series ... Operation & Maintenance Manual

June 2016