- ページ 3
レシーバー DVDO DVDO-H264/5-EncoderのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。DVDO DVDO-H264/5-Encoder 11 ページ。 2k60 h26x transmitter & receiver
DVDO DVDO-H264/5-Encoder にも： ユーザーマニュアル (12 ページ)
ページを印刷する
DVDO
Introduction
This HDMI 2.0 transceiver can transmit uncompressed 1080p @60Hz video
signal up to 100m over a Cat 6a/7 cable. It can self-adjust to operate as a
transmitter and/or a receiver to adapt to the detected input signal; no additional
operation is required. It also supports dual video streaming and HDMI loop-out.
Bidirectional RS232 and IR are also available. Audio out port supports audio
pass-through or audio de-embedding output.
Features
•
Supports HDMI input and output resolutions up to 1080p
•
Supports dual HDMI video streaming or HDMI loop-out to local display.
•
Extends 1080p signal up to 80m over a Cat 5e/6 cable and up to 100m over
a Cat 6a/7 cable.
•
Analog audio port supports pass-through or audio de-embedding output.
•
Bidirectional IR and RS232 pass-through
•
USB 2.0 pass-through up to 480Mbps data rate.
•
Provides front panel, RS232 and LAN control options.
•
Bidirectional PoC capable - power adapter connected to either side can
power both transceivers. (Note: It is recommended that you connect the
power adapter to the transceiver at USB Device side before you use USB
function.)
DVDO-H264/5-Encoder&DVDO-H264/5-Decoder User Manual
3
DVDO-H264/5-Encoder&DVDO-H264/5-Decoder _V1.1