- ページ 13

体重計 ADE M501020のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。ADE M501020 20 ページ。 Electronic wheelchair scales

ページを印刷する

Displaying the gross weight, net weight and tare value:

Press the "0" key to change between displays for tare, gross weight (NET status indicator (5) off) and

net weight (NET status indicator (5) on). If a tare value is saved, the net weight shown corresponds to

the gross weight minus the tare value. If there is no tare value saved, the display remains in gross

mode.

The tare value flashes briefly, then after a second the display changes to gross mode.

Hold function

Use the HOLD key to hold the display if there are weight fluctuations which e.g. are caused by patient

movements on the scales. To do this, the scales must be at standstill, e.g. the standstill status indica-

tor

(14) is on (depending on the setting it is not always necessary for the scales to be at stand-

still). The Hold status indicator (15) is on.

The fixed weight can still be read after the scales have been vacated.

Deactivate the HOLD function by pressing the key again.

Determining the Body Mass Index (BMI)

BMI is calculated by the relationship of body weight to height.

You need the height of the test subject to determine the body mass index. This is most easily calculat-

ed with an ADE measuring rod model MZ10023 or 10032.

Start the scales and weigh the subject. Then press the BMI key (11) to start BMI mode. The last value

entered appears on the display. Now you can use the numerical key pad to enter a new value for the

height (in cm) or to retain the value displayed. Confirm the value entered with the ENTER key or de-

lete it using the CLEAR key. After the entry has been confirmed by the ENTER key, the BMI value will

be calculated using the weight on the scales. The display changes between weight value and BMI

value "b xx.x" (every two seconds) for a period of 3 minutes. Press the BMI key (11) to cancel before

this time has expired.

Evaluating Body Mass Index

BMI under 18

An increase in weight is recommended.



BMI between 18 and 20

The patient is borderline underweight.



The patient feels well, there is no rea-

son for complaint.

BMI between 20 and 25

The patient is within the normal



weight range.

BMI between 25 and 30

The patient is moderately to slightly overweight. A reduction in weight is indicated if there are



pre-existing illnesses (e.g. diabetes, high blood pressure, heart failure).

BMI over 30

Weight loss is urgently recommended. Consultation with a specialist is advised.



Print out a record

The scales must be at standstill, e.g. standstill status display

Press the ENTER key (13) to send the data to the serial interface.

Note: Printing is not possible if the net weight is 0.

The print function only produces one print-out. A reset is required to print out another copy.

M501020-210322-Rev006-UM-e

body weight

BMI=

(height)²

BMI evaluation according to WHO

BMI

18.5

BMI

Severely underweight

Moderately underweight

18.5

Slightly underweight

Normal weight

Overweight

Obese Class I

Obese Class II

Obese Class III

(14) is on.