- ページ 12

ゲートウェイ Frigicoll CCM-18A/N-EのPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。Frigicoll CCM-18A/N-E 16 ページ。 Modbus gateway; k02-modbus

ページを印刷する
Frigicoll CCM-18A/N-E 操作マニュアル
3.4 Upper Computer Access
3.4.1 Upper Computer Access Mode
Upper computer system with Modbus protocol port can communicate with modbus gateway through
Modbus TCP or Modbus RTU. For detailed information, please refer to Fig .2.2 and Fig. 2.3.
3.4.2 Access to Debug
Via Modbus Poll software to access debugging. Here is the debug procedure:
3.4.2.1 Install Modbus Poll software
When finish installing Modbus Poll software, the home page will display like this:
3.4.2.2 Connect Modbus Gateway
There're 2 connection ways: Modbus TCP and Modbus RTU
1)Choose "Connection"->"Connection" in figure 3.7,and then chose TCP/IP in the pop-up window:
To choose a
Connection
Way
IP address for
Connection
Fig.3.7
Connection terminal:
502 by default
Fig.3.8
12