- ページ 13

録音機器 Datavideo MS-2850のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Datavideo MS-2850 15 ページ。 4 channel upgrade i/o card
Datavideo MS-2850 にも：取扱説明書 (20 ページ), 取扱説明書 (8 ページ)

ページを印刷する

Each product built into this Mobile Video Studio receives DC power from the PD-2A or PD-6 unit on the rear

of the MS-2850.

Please ensure the PD-2A or PD-6 is fed with either an AC or DC feed before attempting to switch on the MS-

2850.

For more information on the PD-2A or PD-6 please refer to its manual in the binder.

If a product within the MS-2850 fails to start after the PD-2A or PD-6 is switched on please locate the on/off

switch for that product which has not yet started.

For further advice on using a product within the MS-2850 please refer to its manual in the binder.

Before powering off the MS-2850 via the PD-2A or PD-6 on/off switch please ensure the HDR-70 has been

stopped.

Once the external source and camera cabling have been removed from the rear connection plates replace

and secure the rear case cover.

Return the ITC-100 gooseneck mic, any ITC-100 cabling, tally lights and headsets etc to your accessory kit

bag/box.

Carefully lower the 17" TLM-170LM monitor and slide it back into its horizontal 1U shipping position. Please

remember to secure the silver screws so it cannot slide/move when in transit.

Now raise/tilt upwards the SE-2850 Control Panel Keyboard and secure it in its shipping position with the

- ページ 13

Powering On

Powering Off

Packing Away