- ページ 7

スイッチ Datavideo DAC-10のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Datavideo DAC-10 10 ページ。 Datavideo dac-10: quick setup
Datavideo DAC-10 にも：クイックセットアップ (2 ページ), クイックセットアップ (4 ページ)

ページを印刷する

Operation Procedure:

Step_1. Select the desired mode by setting the dip switches. Reboot the DAC-10 after changing

the dip switches

Step_2. Install the equipment as shown in installation diagrams

Step_3. Ensure that all equipment is turned on

Step_4. Select the video source. If the video source is analog, select the desired audio sampling Rate

Step_5. Playback the source video

Step_6. If needed, calibrate the playback video and audio output level

Step_7. To generate an analog Color Bar output, under the DV mode, press on the "16 BIT" key. The

Color Bar will output from YUV,S(Y/C) and Composite video jacks at the same time. Press on the "16 BIT"

key again back to normal operation.