医療機器 COOK Medical Fusion OASISのPDF クイック・リファレンス・マニュアルをオンラインで閲覧またはダウンロードできます。COOK Medical Fusion OASIS 2 ページ。 One action stent introduction system

Fusion

OASIS

O N E A C T I O N S T E N T I N T R O D U C T I O N S Y S T E M

Tips

1) fusion Oasis is compatible with

cotton-Leung®, cotton-Huibregste® and

ST-2 Soehendra Tannenbaum®.

2) The tapered tip end of the stent or

sideholes (if any) must be positioned in

the common bile duct while the other

end remains in the duodenum.

Step 2

Backload the device onto pre-positioned wire

guide, ensuring the wire guide exits the IDE

port.

M E D I C A L

www.cookmedical.com

Step 1

Place the desired stent and positioning sleeve onto the device, making sure the distal flap of the

stent is covered.

Step 3

Unlock the wire guide from the Wire Guide

Locking Device and advance the device into

the endoscope accessory channel. Once the

IDE port is inside of the accessory channel,

relock the wire guide.

Q u i c k R e f e R e n c e g u i d e

Step 4

Advance the device in short increments until

the stent is inside of the accessory channel,

then slide the positioning sleeve over the

pushing catheter, keeping it clear of the

accessory channel. Continue advancing

the device into the appropriate duct.