- ページ 4
レシーバー DVIGear DVI-7311のPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。DVIGear DVI-7311 4 ページ。 Single-link fiber optic extender, 4x lc
ページを印刷する
Learn EDID Button
Instructions for Learning the EDID from a Display
1.
Apply power to the display.
2.
Connect the DVI-7311 Transmitter unit to the display's DVI input port.
3.
Connect the External AC Power Adapter to the Transmitter unit.
4.
Press the EDID button on the top side of the Transmitter unit (page 2 - #5). The BLUE indicator
LED (page 2 - #2a) will illuminate briefly when the button is depressed and then flash ON once
if the EDID is read successfully.
5. If there is a problem reading the display's EDID, the BLUE Indicator LED will flash ON/OFF
rapidly six times. Should this happen, ensure that all connections are secure and attempt the
EDID Learn process again.
6.
Remove the External AC Power Adapter from the Transmitter unit.
7.
Disconnect the Transmitter unit from the display and connect it to the DVI signal source.
8.
Follow the Installation Instructions (3-6) listed on page 3.
DVIGear, Inc. is the owner of numerous trademarks, both registered and unregistered,
including without limitation, the following marks:
DISPLAYNET SERVER
, DISPLAYNET MANAGER
®
All other third party trademarks used herein are the properties of their respective owners.
4
DVI-7311-QSG-03 / December.2020
Depress the Learn EDID Button
DVIGEAR
, N/AV Design
, and HYPERLIGHT
®
®
© 2020 DVIGear, Inc.
DVIGear
1059 Triad Court, Suite 8
Marietta, GA USA 30062
Toll Free:
Tel:
, DISPLAYNET
,
®
®
Fax:
.
®
www.dvigear.com
888.463.9927
+1.770.421.6699
+1.770.234.4207