- ページ 15

コントローラー Datavideo RMC-180のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Datavideo RMC-180 19 ページ。 Ptz camera control unit
Datavideo RMC-180 にも：取扱説明書 (13 ページ), 取扱説明書 (16 ページ), 取扱説明書 (16 ページ)

ページを印刷する

From time to time, Datavideo may release new firmware to either add new features or to fix

reported bugs in the current RMC-180 firmware. Customers can update the firmware themselves if

they wish or they can contact their local dealer or reseller for assistance should they prefer this

method.

This section describes the firmware update process and it should take approximately 30 minutes

to complete. Once started, the update process should not be interrupted in any way as this could

result in a non-responsive unit.

Requirement

• Latest firmware update files (bootloader and application firmware)

• A USB A to USB A cable not longer than 2 meters

• A Windows PC with USB 2.0 ports

1. Power off the RMC-180 and connect the USB A cable between the USB firmware upgrade port

on the RMC-180 rear panel and a USB port on the computer

2. Press and hold the four buttons indicated with

3. With an assistant's help, one person switches on the RMC-180 device while another person

presses and holds the buttons indicated with

6. Firmware Upgrade Procedure

at the same time